CNC Systems Information Model

From UaCapabilities
Revision as of 09:39, 8 February 2017 by Karl (Talk | contribs)

Jump to: navigation, search

Introduction

Computerized Numerical Control (CNC) systems are used to control machine tools and machining centers. The CNC system is mainly responsible for generating a relative movement between a tool (e.g cutting tool) and a workpiece. Therefore, the CNC system implements functionality to provide setpoints to a machine tool’s drives that realize the generated movement physically.

CNC systems are in most cases executed in combination with Programmable Logic Controllers (PLC). Whereas the CNC is responsible for the tool path generation, the PLC implements auxiliary functionality (mostly logical operations like activating lubrication at a certain time) and controls the peripheral devices.

This specification was created by a joint working group of the OPC Foundation and VDW. It defines an OPC UA Information Model to interface and exchange data with CNC systems.

CNC Systems Capabilities

CNC Basic

URN:          https://opcfoundation.org/wiki/index.php/CNC_Systems_Information_Model#CNC_Basic

Discovery ID: CNC


Description
Understand and support the OPC UA for CNC Information Model. Support the interface structure and the access of all data provided by the CNC system, namely parameters, state data, process and command data, and alarm notifications that are defined by this companion standard.

Usage Considerations
Setup: The CNC data interface provides data that can be used for setting up a production system controlled by a CNC. This refers first of all to production commissioning data (e.g. job description, tool data etc.) but implies to a certain extent as well CNC configuration data (e.g. axis parameters, cycle time etc.), as needed for engineering.
Operation: The CNC data interface may be used for operating a production system controlled by a CNC and therefore serves as a connection point for user interfaces.
Observation: The CNC data interface may be used for observing a production system controlled by a CNC and therefore serves as a connection point for monitoring and diagnosis applications and for user interfaces.


Conformance Testing

Client Server
  • Base CNC Data Interface Server Facet
  • Model Change Server Facet

CNC Data Interface Client Facet

FDI Communication Server

URN:          https://opcfoundation.org/wiki/index.php/Field_Device_Integration_(FDI)#FDI_Communication_Server

Discovery ID: FDIC


Description
Understand and support the OPC UA for FDI Information Model for Communication Server (IEC62769-7).

Usage Considerations
Integrate devices with protocols that are not natively known to the FDI Host.


Conformance Testing

Client Server

Client (FDI Host / Server) is able to use FDI Communication Server

Support the FDI Communication Server information model to represent a specific device protocol